1. Konfigurasi router
Router>enable
Router#configure terminal
Enter configuration commands, one
per line. E
nd with CNTL/Z.
Router(config)#hostname
agung_setyawan
agung_setyawan(config)#hostname
router_setyawan
router_setyawan(config)#enable
password 123456789
router_setyawan(config)#interface
fa0/1
router_setyawan(config-if)#ip
address 192.168.10.100 255.255.255.0
router_setyawan(config-if)#no
shutdown
router_setyawan(config-if)#
%LINK-5-CHANGED: Interface
FastEthernet0/1, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol
on Interface FastEthernet0/1, changed state to up
router_setyawan(config-if)#exit
router_setyawan(config)#exit
router_setyawan#
%SYS-5-CONFIG_I: Configured from
console by console
router_setyawan#write memory
Building configuration...
[OK]
router_setyawan#
2. Setelah kita konfigurasi router , kemudian kita konfigurasi ip address setiap komputer seperti gambar di bawah ini :
3. Lalu test koneksi dari client ke client lainnya ataupun dari client ke router
Jika hasilnya seperti gambar diatas berarti , selamat koneksi anda berhasil :)